Fein KBH25S Instrucciones De Uso página 13

OBJ_BUCH-0000000153-004.book Page 13 Monday, September 3, 2018 11:40 AM
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the auxiliary handle (figure 2).
Do not apply grease and oil on inside of tensioning strap!
Position the tensioning strap correctly!
Tighten handle firmly!
To loosen the clamping strap of the auxiliary handle, turn the handle counterclockwise.
Slide the strap of the auxiliary handle in the desired working position onto the collar until the
teeth engage into the recesses, and then tighten.
Strap
2.
1.
Auxiliary handle
3.
2.
4.
3.
1.
Auxiliary handle
en
13
Fig. 2
5.