General Information - WIKA PG43SA-S Manual De Instrucciones

1. General information

1. General information
The pressure gauge described in the operating instructions has
„
EN
been designed and manufactured using state-of-the-art technol-
ogy. All components are subject to stringent quality and environ-
mental criteria during production. Our management systems are
certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on
„
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and
„
general safety regulations for the instrument's range of use.
The operating instructions are part of the product and must be
„
kept in the immediate vicinity of the instrument and readily acces-
sible to skilled personnel at any time. Pass the operating instruc-
tions on to the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood the
„
operating instructions prior to beginning any work.
The general terms and conditions contained in the sales
„
documentation shall apply.
Notes per pressure equipment directive
These instruments are defined as "pressure accessories" per
pressure equipment directive chapter 1, article 2.5.
Applied standards
EN 837-2 Selection and installation recommendations for pressure
gauges
EN 837-3 Diaphragm and capsule pressure gauges, dimensions,
metrology, requirements and testing
4
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C