RedMax GZ3500T Manual Del Usuario página 3

7. Starter rope handle
8. Starter housing
9. Vibration damping system, 3 units
10. Chain oil tank
11. Muffler
12. Chain brake and front hand guard
13. Start/stop switch
14. Choke control
15. Air purge
16. Clutch cover
17. Chain tensioning screw
18. Brake band
19. Chain catcher
20. Spiked bumper
21. Saw chain
22. Guide bar
23. Bar tip sprocket
24. Transport guard
25. Operator's manual
26. Combination wrench
27. Top handle
28. Information and warning decal
29. Rope eyelet
Symbols on the product
Careless or incorrect use of this product can
result in serious or fatal injury to the operator
or others.
Read the operator's manual carefully and
make sure you understand the instructions
before you use this product.
Always wear approved protective helmet,
approved hearing protection and protective
goggles or a visor.
Both of the operator's hands must be used
to operate the chainsaw.
Never operate the chainsaw holding it with
one hand only.
Never let the guide bar tip come in contact
with any object.
Warning! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
995 - 003 - 30.01.2019
towards the operator. May cause serious
personal injury.
Use appropriate protections for foot-leg and
hand-arm.
Chain brake, activated (right). Chain brake,
not activated (left).
Air purge.
Adjustment of the oil pump.
Refuelling.
Chain oil fill.
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle with
actuated chainbrake, CKA wb.
yyyywwxxxxx
RedMax
This chainsaw should only
be used by persons who
are specially trained in
tree maintenance work.
See operator's manual!
Working position.
Choke.
The rating plate showing
serial number. yyyy is the
production year, ww is the
production week.
Recommended cutting
equipment in this exam-
ple: - Guide bar length: 14
inches - Max. nose radius:
7 Teeth - Saw chain type:
RedMax H37
3