Johnson JSMV2 Serie Manual De Instrucciones página 40

Instructions for packing/unpacking the unit:
Unpacking:
Indoor unit:
1. Cut the sealing tape on the carton with a knife.
2. Take off the carton.
3. Remove the upper packaging foam.
4. Untie the packaging bag.
5. Take out the indoor unit.
Outdoor Unit:
1. Cut the packing belt.
2. Take the unit out of the carton.
3. Remove the foam from the unit.
4. Remove the packaging bag from the unit.
Packing:
Indoor unit:
1. Put the indoor unit on the lower packaging foam.
2. Put the packing bag on the indoor unit.
3. Attach the upper packaging foam to the unit.
4. Put the carton on the unit.
5. Seal it with the tape.
6. Using the packing belt if necessary.
Outdoor unit:
1. Put the outdoor unit into the packing bag.
2. Put the bottom foam into the box.
3. Put the unit into the carton, then put the upper packaging foam
on the unit.
4. Close the carton and seal it with the tape.
5. Using the packing belt if necessary.
NOTE: Please keep all packaging items if you may need in the future.
V.3