Other Operations - Sony HT-M7 Manual De Instrucciones

Operating the USB device
NX
./>
MASTER
VOL +/–
1
Press USB.
You can also use INPUT SELECTOR on
the receiver.
When the USB device is connected,
"USB" indicator appears on the display
panel.
2
Press NX to start playback.
3
Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
4
Press MOVIE, MUSIC or
GAMING to enjoy the surround
sound.
For details, see page 41.

Other operations

Press
NX
m/M
./>
FOLDER +/–
REPEAT
USB
MOVIE,
MUSIC,
Notes on the USB device
GAMING
• Do not remove the USB device during
operation. To avoid data corruption or
m/M damage to the USB device, turn the receiver
FOLDER
off when removing the USB device.
+/–
• When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected. Refer to the
operating instructions supplied with the
USB device to be connected for details on
REPEAT
the operation method.
• Do not connect the receiver and the USB
device through a USB hub.
• When the USB device is connected,
"READING" appears.
• It may take about 10 seconds before
"READING" appears depending on the type
of USB device connected.
• When the USB device is connected, the
receiver reads all the files on the USB
device. If there are many folders or files on
the USB device, it may take a long time to
finish reading the USB device.
• The receiver can recognize up to
– 100 folders (including "ROOT" folder).
– 100 audio files for each folder.
– 8 folder levels (tree structure of files,
including "ROOT" folder).
The maximum number of audio files and
folders may vary depending on the file and
folder structure.
Do not save other types of files or
unnecessary folders on a USB device.
Operation
Starts/pauses play.
Fast reverses or forwards.
Goes to the previous/next file.
Goes to the previous/next folder.
Enters repeat mode.
• RPT. OFF/RPT. ONE/
RPT. ALL/RPT. FLD
continued
35 US