Pioneer DV-757Ai Manual De Instrucciones página 15

Connecting Up
Optical connection: Use an optical cable
(not supplied) to connect the OPTICAL
DIGITAL OUT jack to an optical input on
your AV receiver.
• When inserting the plug, the protective
shutter will open and you should hear
the plug click into position when fully
inserted. Take care not to force the plug
as this may damage the shutter, the
cable and/or the player.
Coaxial connection: use a coaxial cable
(similar to the supplied video cable) to
connect the COAXIAL DIGITAL OUT jack to
a coaxial input on your AV receiver.
2 If you didn't connect the 5.1 channel
analog outputs, connect the AUDIO OUT
(2ch) jacks on this player to a stereo
analog input on your receiver.
AV receiver
(AUDIO)
S400
L CENTER
OPTICAL COAXIAL L
AUDIO OUT
IN OUT
(5.1ch)
R
R SUB
WOOFER
AUDIO FRONT SURROUND
DIGITAL AUDIO
CONTROL
OUT
OUT
(2ch)
• You can also use the AUDIO OUT 5.1ch
FRONT L/R jacks for the analog audio
connection.
STEREO
AUDIO IN
AV CONNECTOR 1 (RGB)-TV AV CONNECTOR 2
1 2
1 2 Y P P
B R
S-VIDEO VIDEO
COMPONENT VIDEO OUT
OUT OUT
3 Connect the VIDEO OUTPUT jack on
this player to a video input on your AV
receiver.
AV receiver
(AUDIO)
S400
L CENTER
OPTICAL COAXIAL L
AUDIO OUT
IN OUT
(5.1ch)
R
R SUB
WOOFER
AUDIO FRONT SURROUND
DIGITAL AUDIO
CONTROL
OUT
OUT
(2ch)
• Alternatively, you can use the S-Video or
component video connections if they're
available.
4 Connect the AV receiver's video
output to a video input on your TV.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.
VIDEO
INPUT
AV CONNECTOR 1 (RGB)-TV AV CONNECTOR 2
1 2
1 2 Y P P
B R
S-VIDEO VIDEO
COMPONENT VIDEO OUT
OUT OUT
02
15
En