Publicidad
Idiomas disponibles
Idiomas disponibles
The Initial Settings Menu
CD Playback
• Default setting: PCM Playback
Initial Settings
Digital Audio Out
Parental Lock
Video Output
Bonus Group
Language
Auto Disc Menu
Display
Group Playback
Options
DVD Playback Mode
Speakers
SACD Playback
i.LINK Setup
CD Playback
When set to PCM Playback, playback is
optimized for standard audio CDs. You can
also play DTS CDs, however you may notice
some noise when a DTS CD starts playing.
This is not a malfunction.
When set to DTS CD Playback, playback is
optimized for DTS CDs. In this mode you
cannot play standard audio CDs through the
analog outputs. Change the setting back to
PCM Playback to play standard CDs.
The i.LINK audio output is not affected by
this setting.
Speakers
Audio Output Mode
• Set in Setup Navigator (Default: 2
Channel)
Initial Settings
Digital Audio Out
Audio Output Mode
Video Output
Speaker Installation
Language
Speaker Distance
Display
Channel Level
Options
Speakers
i.LINK Setup
If you connected this player to an AV receiver
using the i.LINK or 5.1 channel analog
outputs, set this to 5.1 Channel. This will
enable you to enjoy multichannel sound.
If you connected only the stereo analog
outputs, set to 2 Channel. On this setting
multichannel audio is downmixed to 2
channels for stereo analog output and i.LINK
output (digital output from the optical and
coaxial jacks is not affected by this setting).
PCM Playback
DTS CD Playback
Speaker Installation
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect any digital audio
output.
2 Channel
5.1 Channel
Use the Speaker Installation screen to tell
the player what kinds of speakers you have
connected.
• When set to 5.1 Channel, you'll only get
sound from all speakers when playing
multichannel discs.
• When set to 5.1 Channel the AUDIO
OUT (2ch) jacks output the front L/R
channels of multichannel discs.
• When set to 5.1 Channel there is no
optical/coaxial digital output when
playing DVD-Audio discs.
• Some DVD-Audio discs don't allow
down-mixing of audio. These discs
always output multi-channel audio
regardless of the setting made here.
• Set in Setup Navigator (default: L/R:
Large | C: Large | LS/RS: Large| SW:
On )
Initial Settings
Digital Audio Out
Audio Output Mode
Video Output
Speaker Installation
Language
Speaker Distance
Display
Channel Level
Options
Speakers
i.LINK Setup
3 2 Channel
3 Fix
08
67
En
Publicidad
