Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting Up
• In order to be able to hear multichannel
sound from SACDs, DVD-Video and
DVD-Audio discs, you need to set
SACD Playback to Multi-ch Area,
and the Audio Output Mode to
5.1 Channel (see pages 66 and 67).
• To be able to use the Auto Select Play
feature, you must first set it up using the
Auto Select Play menu screen. See
page 71.
• When the i.LINK indicator ( ) is lit on
the front panel (page 20), no audio is
output from the other digital or analog
audio jacks. You can switch off the
i.LINK output using the Audio Out
menu (page 70) if you need to use the
analog and/or optical/coaxial digital
outputs.
• The front panel i.LINK indicator only
lights when the receiver is on and the
input is set to i.LINK. See also the
receiver's operating instructions.
• You can connect several components
together using i.LINK. See Creating an
i.LINK network below.
• If you need to use an i.LINK cable other
than the one supplied, please use 4-pin,
S400 cables less than 3.5 meters long.
Although longer ones are available, they
may not work reliably.
Creating an i.LINK network
Using i.LINK it is possible to chain up to 17
components together so that the digital
audio and control signals from each
component is available to other components
in the network. With the addition of an i.LINK
repeater, it's possible to connect up to 63
components.
i.LINK connectors come in 4-pin and 6-pin
configurations. This player uses the 4-pin
connection, but the two types can be mixed
on a network.
This player is compatible with i.LINK Audio
components, such as AV receivers. It may
not work properly if connected to i.LINK
MPEG-II TS equipment (such as a digital
satellite tuner), i.LINK DV equipment (such
as a DVD recorder or DV camcorder), or an
i.LINK-equipped personal computer. Check
the operating instructions supplied with your
other i.LINK components for compatibility
information.
Connected components should be DTCP
(Digital Transmission Content Protection)
compliant to be able to play DVD-Video, DVD-
Audio and SACD i.LINK audio. If a connected
component is not DTCP compliant, only CD
audio will be output.
When setting up an i.LINK network, it's
important that the components form an open
ended chain (fig. 1), or a tree (fig. 2).
i.LINK cable
fig. 1
i.LINK cable
fig. 2
02
17
En
Publicidad
