Pioneer DV-757Ai Manual De Instrucciones página 71

The Initial Settings Menu
Connections Setup
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language Auto Select Play
Display
Options
Speakers
i.LINK Setup
This screen shows the equipment connected
using the i.LINK interface.
Components which are able to receive
i.LINK Audio are shown in black (an i.LINK
receiver, for example); those which can't (a
DV camcorder, for example) are shown in
gray. If the player can't display the name of a
component, '****' is shown; if the name
can't be determined, Unknown is displayed.
Select the component that you want to set
up the audio output formats for.
Initial Settings
Digital Audio Out Connections Setup
Video Output
Language
Display DolbyDigital
Options DTS
Speakers MPEG
i.LINK Setup
This screen shows the output settings for
Dolby Digital, DTS and MPEG audio.
Depending on the other component, these
may be configured automatically. If this
player can't determine the appropriate
settings, the defaults are Dolby Digital, DTS
and PCM. If you need to change the settings,
move the cursor right and make the new
setting.
VSX-49TXi
VSX-AX10i
DV-47Ai
VSX-49TXi : Pioneer
PCM
DTS
MPEG
Auto Select Play
• Default setting: Off
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language Auto Select Play
Display
Options
Speakers
i.LINK Setup
Using this setting you can specify up to five
receivers to automatically switch input
function to this player when you start
playback of a disc. Highlight a receiver from
the list and press ENTER.
The most recently selected component is
marked with a orange box (7). The i.LINK
output when playing Dolby Digital, DTS or
MPEG discs will be as set for this component
(see also Connections Setup above).
Select Off to reset all the settings.
When the i.LINK connections are changed,
the following screen appears.
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language Auto Select Play
Display
Options
Speakers
i.LINK Setup
Press ENTER to return to the menu screen.
• Whether a receiver from the list has
been selected or not, this player will
start playback when you change the
input function of the receiver to this
player.
• Note that some AV receivers may not be
compatible with this feature.
Off
VSX-49TXi
VSX-AX10i
Off
VSX-49TXi
Connections were changed
VSA-AX10
and thus updated.
ENTER
08
71
En