Scanning The Tracks; Intro Scan - Sony WX-C770 Manual De Instrucciones

Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD TEXT disc or MD exceeds 10 characters
and the Auto Scroll function is on,
automatically scrolls on the display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
• The disc or track name appears depending on
the setting when you press (CD/MD) to select an
MD or CD TEXT disc.
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (SHIFT).
2
Press (8) (SET UP) repeatedly until
"A.Scrl" appears.
EN
3
Press (10) (n) to select "A.Scrl on."
4
Press (SHIFT).
To cancel Auto Scroll, select "A.Scrl off" in
step 2 above.
Note
For some CD TEXT discs with extremely many
characters, the following cases may happen:
— Some of the characters are not displayed.
— Auto Scroll does not work.
Displaying the recording date of
the current MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you
want to skip.
SEEK/AMS
To locate succeeding tracks
To locate preceding tracks
20
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
SEEK/AMS
To search forward
To search backward
Locating a disc by disc number
— Direct Disc Selection
Press the number button that
corresponds with the desired disc
number.
The desired disc in the current changer
begins playback.

Scanning the tracks

— Intro Scan

You can play the first 10 seconds of all the
tracks on the current disc.
1
During playback, press (SHIFT), then
press (9) (P MODE) repeatedly until
"Intro" appears.
2
Press (10) (n) to select "Intro on."
Intro Scan starts.
3
Press (SHIFT).
To go back to normal playback mode, select
"Intro off" in step 2 above.