Locating A Disc By Name - List-Up; Selecting Specific Tracks For Playback; Bank - Sony WX-C770 Manual De Instrucciones

Locating a disc by name
— List-up (CD changer with the custom file
function or MD changer)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 21).
1
Press (LIST) momentarily.
The name assigned to the current disc
appears in the display.
C D 2 L 1 S C H U B E R T
DISC NAME
If you add disc memo labels to a CD TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD TEXT or disc memo labels), that
information will be displayed regardless of
the display setting you make.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (6) (ENTER) to play back the disc.
Notes
• After a disc name has been displayed for five
seconds, the display goes back to normal
playback mode. To turn off the display, press
(DSPL).
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "?" appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD playback).
Selecting specific tracks
for playback
(CD changer with the custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (9) (P MODE) for two
seconds.
Bank edit mode.
C D 2
DISC MEMO
Note
If you have not labeled the disc, the bank edit
mode does not appear and the program edit
mode appears. To go back to normal playback
mode, press (SHIFT).
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (6) (ENTER).
C D 2
The indication changes from "Play" to
"Skip." If you want to return to "Play,"
press (6) (ENTER) again.
3
Repeat step 2 to set the "Play" or "Skip"
mode on all the tracks.
4
Press (9) (P MODE) for two seconds.
The unit returns to normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the "Play" and "Skip" mode on up
to 24 tracks.
• You cannot set the "Skip" mode on all the
tracks.

— Bank

3 1 B a n k P l a y
DISC TRACK
3 3 B a n k S k i p
DISC TRACK
EN
23