Recording The Cd Tracks By; Specifying The Tape Length - Sony ZS-D7 Manual De Instrucciones

Recording the CD
tracks by
specifying the
tape length
There are three options in editorial
recording:
• Recording all the tracks in the original
CD order (EDIT ALL)
• Recording programed tracks (EDIT
PGM)
• Recording a single track you have
selected (EDIT 1 TRACK)
Tips
• You can edit a CD
having 20 tracks or
fewer.
The tape length needed
to record the whole CD,
appears in the display
(unit: 2 minutes, up to
98 minutes).
• We recommend that
you use AC power as
the power source for
optimum recording
quality.
Note
Do not open the CD
tray while editing; the
settings for recording
will be erased. If you
do, start from step 1
again.
DUB START
CD m TAPE
PUSH
OPEN/CLOSE
Recording all the tracks of the CD (EDIT ALL)
Approximately the first half of the CD will be
recorded on one side of the tape, and the second half
will be recorded on the other side, without reversing
the tape in the middle of a track. According to the tape
you use, you can set the total recording time.
1
Press p until "CD" appears in the display.
2
Press MENU.
3
Turn the jog dial until "EDIT" flashes and press
ENTER.
MENU Jog dial
ENTER
continued
The Tape Player
p
25 EN