Canon imageRUNNER ADVANCE 4251i Guía De Usuario página 50

3
Load the appropriate size paper into the
paper drawer.
1. Make sure that the paper size setting of the paper
drawer matches the size of the paper to load in the
paper drawer.
2. Load the paper stack against the right wall of the paper
drawer.
4
Change the paper drawer's paper size plate
to match the new paper size.
1. Open the inside cover of the paper drawer, and lift up
the plate.
2. Rotate the plate so that the new paper size is on the
right side of the plate.
3. Insert the plate straight down, and close the inside
cover.
NOTE
The paper size that cannot be used depending on the
model and settings is also listed on the paper size plate.
5
Gently push the paper drawer back into
the machine until it clicks into place in the
closed position.
When returning the paper drawer to its original
position, be careful not to get your fi ngers caught, as
this may result in personal injury.
48 Routine Maintenance 3