Publicidad
INSTALLATION INSTRUCTIONS
Drill a 5/16" hole
for the anchor.
Anchor
Determine the location for the slidebar.
Mark the hole locations for the wall anchors.
Drill the holes and install the wall anchors.
Attach the escutcheons, sleeves, and hubs with the screws.
Slide the handshower bracket onto the tube.
Insert the couplings into the ends of the tube. Line up the holes in the tube with the holes in the couplings.
Place the tube over the sleeves.
Tighten the setscrews so they engage with the groove in the hubs.
Screw the caps onto the exposed ends of the setscrews.
1188577-2-E
5 of 5
4. INSTALL THE OPTIONAL SLIDEBAR (P24456)
Escutcheon
Sleeve
Hub
Screw
Handshower, Hose
& Handshower Accessories
Cap
Setscrew
O-Ring
Coupling
Tube
Handshower
Bracket
Coupling
O-Ring
Setscrew
Cap
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com
Publicidad
