Names And Functions Of Parts (Docking Station) - Teac DS-H01 Manual Del Usuario

Names and Functions of Parts (Docking Station)

A
A
STANDBY/ON
Press this button to turn the unit on and to put it into standby . When the power is on, the ring
around the button (power indicator) lights blue .
o If nothing is connected to this unit when the power is turned on, it will enter standby mode,
and the power indicator will not light blue . When you connect an iPod/iPhone/iPad to the
dock connector or connect an operating computer to the unit using a USB cable, the power
indicator will light blue .
B
Remote control signal receiver
This receives signals from the remote control . When using the remote control, aim the end of the
remote control toward the remote control signal receiver .
C
Dock connector
Use this to connect an iPod/iPhone/iPad .
D
Dock cover
When not using an iPod/iPhone/iPad, close this to protect the dock connector .
When using an iPod/iPhone/iPad, open this and use it to hold the iPod/iPhone/iPad .
For details, see "Using an iPod/iPhone/iPad with the Dock" on the next page .
o Fold the dock connector toward the dock cover before closing the cover .
8
B C
D