Publicidad
Idiomas disponibles
Idiomas disponibles
Electric requirements
WARNING
Electrical shock hazard
Failure to follow these instructions can result in death,
fire or electrical shock.
The electrical ratings for your air conditioner are listed on the
model number label. The model and serial label is located on
one side of the evaporator and the condenser.
The specific electrical requirements are indicated in the
following table. Follow the requirements for the type of wiring for
the electric power cord.
COMPONENT
Models: WA
9060Q
IDU
ODU
Communications cable
Models: WA9260Q
IDU
ODU
Communications cable
Recommended method for grounding
For your personal safety, this air conditioner should be
grounded. If an appropriate electrical outlet is not available, it is
the responsibility of the customer to properly install grounding
by a qualified electrical installer.
.
It is the responsibility of the client:
●
Call a qualified electrical installer.
●
Connect the device to a two-pole switch device, with a
contact distance of at least 3 mm, located at a point that is
accessible after installation.
●
Ensure that the electrical installation is adequate and is
made in accordance with the National Electric Code, and all
local codes and regulations.
use the help or at least one or more people to move and
install the air conditioner.
to follow these instructions could cause dead or
electrical shock.
Remove packaging materials
●
Remove and properly dispose all packaging materials.
Remove tapes and rubber residue from the Air conditioner
before turning it on. Rub a little dishwasher liquid detergent
on the adhesive with fingers. Clean with warm water and
dry.
●
Do not use sharp instruments, alcohol for friction,
flammable liquids or abrasive cleaning products to remove
the remains of tape or rubber. These products can damage
the surface of your air conditioner.
●
Treat the air conditioner with care.
Wire
Heavy Duty
Component
Models: WA9160Q
14 AWG
IDU
14 AWG
ODU
18 AWG
Communications cable
14 AWG
14 AWG
18 AWG
Unpack your air conditioner
WARNING
Excessive weight hazard
Wire
Heavy Duty
14 AWG
14 AWG
18 AWG
4
Publicidad
