BEFORE USING YOUR AIR CONDITIONER
Before using the air conditioner, make sure to adjust the following settings:
●
Remote control
You can control the air conditioner using the wireless remote control (included).
How to install the batteries (not included)
Remove the battery cover following the direction of the arrow.
Insert the new batteries, make sure the polarity of the batteries is correct. (+) (-).
Install the cover again, slide it back to its close position.
Note:
Use 2 AAA batteries (1.5 V). Do not use rechargeable batteries. Replace
the batteries for new batteries of the same type when the display is faded.
Use of the remote control
To operate the air conditioner, point the remote control at the signal receiver. The remote control controls the air conditioner at up to 7m
when facing the signal receiver of the indoor unit.
Manual operation
When the remote control does not work or is lost, you can turn the air conditioner on and off using the emergency button, which is
located behind the front panel on the right. Lift the front panel; if the unit is on, press the emergency button to stop operation, if the unit
is off press the emergency button to turn it on.
Note: the unit will operate in AUTOMATIC mode. See the "Operating Instructions" section for more details.
Remote control (included)
5