Publicidad
Idiomas disponibles
Idiomas disponibles
Smart mode "SMART"
Press the SMART button, the unit will enter SMART mode
The sensor in the indoor unit, which measures temperature and
humidity in the room, keeps the room temperature in the most
comfortable level by controlling the temperature and the fan
speed automatically. Press the Smart button on the remote
controller to enable it: Smart icon appears automatically on the
remote control display, in cooling mode the air conditioner will
set the fan speed to auto, adjust the temperature and humidity
automatically according to the environment
1. The unit will automatically sense the outdoor air temperature
every 3 hours and select the operation mode for you, detail see
below table.
outdoor temperature range
25°C ≤ Tod
22°C ≤ Tod ＜25°C
22°C ＞Tod
Tod is= outdoor environment temperature.
Note: Mode cannot be switched manually under Smart
function
2. . In cooling mode, unit will automatically set a
comfortable temperature and humidity for y
can adjust it base on your need, to adjust temperature
by pressing the + and - button on remote control.On
the display , "0" to indicate the default, other number
(-3, -2, -1, 0, 1, 2, 3) corresponding to temperature
change as below:
outdoor temperature rate
30°C ≤ Tod
25°C ≤Tod ＜ 30°C
22°C ＞Tod
3.After setting the desired temperature, there will be a new humidity setting display. You can press the
"
and
" to change the setting, the range is from -15% to 15% based on the default setting .
How to cancel the SMART mode?
Press the MODE button can cancel the SMART mode.
OPERATING INSTRUCTIONS
Mode setting
COOLING
FAN ONLY
HEATING
，you
Default mode
COOLING
COOLING
HEATING
Default setting
Max
24°C
27°C
22°C
25°C
24°C
27°C
Min
21°C
19°C
21°C
10
Publicidad
