Publicidad
Idiomas disponibles
Idiomas disponibles
Choose the best location
Location to install the indoor unit
●
Places where there are no obstacles near the exit and it can easily reach all
corners.
●
Places where pipes can be installed, and wall holes can be easily made.
●
Observe the necessary distance between the ceiling and the wall, according to
the wiring diagram.
●
Places in which the air filter can be removed easily.
●
Keep the unit and remote control within 1 m or more from the television, radio,
etc.
●
Do not place objects near the air inlet that can obstruct it.
●
A place that supports the weight and that does not increase the noises and
vibrations caused by the operation.
Location for installation of the outdoor unit
●
Perform the installation in a suitable and well-ventilated place, avoid doing it in
places where there may be flammable gas leaks.
●
Keep the necessary distance from the wall.
●
Do not install the outdoor unit in a dirty place with grease stains, near a vulcanized
gas outlet nor in coastal areas with high salinity.
●
Avoid installing the unit next to a road, where you might receive splashes of dirty
water.
●
Use a fixed base that does not increase the noise of the unit. The use of synthetic
rubber on the bases of the outdoor unit is recommended.
●
Avoid obstructing the air outlet.
●
Install it where the air discharge and the noise does not disturb the neighbors.
Model
WA9060Q
WA9160Q
WA9260Q
Pipe length at
Allowed pipe limit
packaging (m)
(m)
4
15
4
15
4
15
Elevation difference
gas required (g/m)
limit (m)
4
4
4
Additional coolant
20
20
30
18
Publicidad
