Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Replacement
Under normal conditions, the original battery in your UPS will last several years. Battery
replacement should be performed only by qualified service personnel. Refer to "Battery
Warnings" in the Safety section. Should your UPS require battery replacement, visit Tripp Lite
on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement
battery for your UPS. The batteries are designed for hot-swap replacement (i.e. leaving the UPS
in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode
and disconnect equipment before proceeding.
Procedure
1
Remove Front Panel
2
Disconnect Batteries
3
Remove/Dispose of Batteries
4
Add Batteries
Connect Batteries
5
Attach connectors: black-to-black and red-to-red.
6
Replace Front Panel
201203257 93-2486.indd 14
1
2
3
14
6
5
4
4/3/2012 3:13:02 PM
Publicidad
