Publicidad
Idiomas disponibles
Idiomas disponibles
7.
If you are pulsing, repeat the process. If you are gliding,
simply continue. Continue to pulse or glide until you have
treated the area fully.
EN
Avoid gaps or overlaps.
Z
The device will only emit repeated pulses when it is in firm
Z
contact with your skin, and you keep moving it across your
skin.
Stop use immediately, if your skin blisters or burns, if you
[
feel very uncomfortable, or if the device gets too hot.
7.1 After treatment
When you have finished your treatment session:
Long press the control button (#6) to switch off the device.
1.
Remember the last energy level setting you used, because
it will not be restored when you turn the device on again.
2.
Disconnect the adapter from the electricity supply, then
clean the device and store safely (see section 8. Cleaning,
maintenance & storage).
3.
After your treatment session we recommend you apply a
body lotion to the treated area to help your skin recover
from the treatment faster.
20
Publicidad
