Receiving The Memorised Stations - Sony MDX-C6500X Manual De Instrucciones

Fm/am minidisc player
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Receiving the memorised
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
Tip
Press either side of (DISC/PRST) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
If you cannot tune in a preset
station
Press either side of (SEEK/AMS) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU), then press either side of (DISC/PRST)
repeatedly until "LOCAL" (local seek mode) is
displayed. Then press the (+) side of (SEEK/AMS) to
select "LOCAL-ON." Press (ENTER).
Only the stations with relatively strong signals will
be tuned in.
Tips
• When you select the "LOCAL-ON" setting,
"L.SEEK" appears while the unit is searching for
a station.
• If you know the frequency of the station you
want to listen to, press and hold either side of
(SEEK/AMS) until the desired frequency appears
(manual tuning).
16
If FM stereo reception is poor
— Monaural Mode
1
During radio reception, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "MONO-OFF" appears.
2
Press the (+) side of (SEEK/AMS) until
"MONO-ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (ENTER).
To return to normal mode, select "MONO-
OFF" in step 2.
Automatical reception frequency
adjustment
— IF AUTO function
If interference occurs, the "IF AUTO" function
of this unit will automatically avoid noise and
narrow the reception frequency. In such cases,
some FM stereo broadcasts may become
monaural. If you would like to hear such
broadcasts in stereo, manually switch to the
"WIDE" setting.
1
During radio reception, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "IF AUTO" appears.
2
Press the (+) side of (SEEK/AMS) until
"WIDE"" appears.
3
Press (ENTER).
Note
When you widen the frequency signal reception
setting ("WIDE" mode), some interference may
occur.

Publicidad

Tabla de contenido
loading

Tabla de contenido