Receiving The Stored Stations; Locating A Station By Name - List-Up - Sony MDX-C800REC Manual De Instrucciones

Receiving the stored
stations
1
Press (SOURCE) repeatedly to select the
radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
Tip
Press either side of (DISC/PRST) to receive the
stations in the order they are stored in the
memory (Preset Search function).
If you cannot tune in a preset
station
Press either side of (SEEK/AMS) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU), then press either side of (DISC/PRST)
repeatedly until "Local off" is displayed. Then
press the (+) side of (SEEK/AMS) to select "Local
on" (Local Seek mode). Press (ENTER).
Only the stations with relatively strong signals will
be tuned in.
Tips
• When you select the "Local on" setting, "LCL
Seek" appears while the unit is searching for a
station.
• If you know the frequency of the station you
want to listen to, press and hold either side of
(SEEK/AMS) until the desired frequency appears
(manual tuning).
30
If FM stereo reception is poor
— Monaural Mode
1
During FM radio reception, press
(MENU), then press either side of
(DISC/PRST) repeatedly until "Mono off"
appears.
2
Press the (+) side of (SEEK/AMS) until
"Mono on" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (ENTER).
To return to normal mode, select "Mono off"
in step 2.
Locating a station by
name
— List-up
1
During radio reception, press (LIST)
momentarily.
The name assigned to the station currently
tuned in flashes.
2
Press either side of (DISC/PRST)
repeatedly until you find the desired
station.
If no name is assigned to the selected
station, the frequency appears on the
display.
3
Press (ENTER) to tune in the desired
station.
Note
When using the card remote commander, press
(LIST) to return to normal play mode. When
operating just by the unit's button, the display
returns to normal play mode after 5 seconds.