ed. Any other use must be consid-
ered "IMPROPER" and therefore the
manufacturer declines all liability for
any consequent damage to persons
or property.
Particular safety prescriptions
(obligation-prohibitions-danger)
are detailed in the specific chap-
ter concerning these issues.
Do not obstruct the heat ex-
traction
openings.
Do not leave flammable ob-
jects or material near the appli-
ance.
stream the appliance whenever you
need to work in safe conditions.
Whenever it is necessary to
operate inside the appliance
(connections, commissioning,
checking operations, etc.) prepare for
the necessary operations (removal of
panels,
elimination
tric-gas-power supply) in compliance
with the safety conditions.
DUTIES AND QUALIFICATIONS
REQUIRED OF OPERATORS
Prohibition for the homogene-
ous operator to perform any
type of operation (maintenance
and/or other) without having first read
the entire documentation.
The information con-
tained in this document
is for the use of the qual-
ified technical operator who is author-
ised for: handling, installation and
maintenance of the appliance in
question.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
and/or
dissipation
Disconnect all sup-
plies (water - gas
-
electrical)
of
elec-
ric" operator (Operator with limited
responsibilities and tasks). Person
authorised and employed to operate
the appliance with guards active and
capable of performing routine main-
tenance (cleaning the appliance).
The operators who use the ap-
pliance must be trained in all
aspects concerning its function-
ing and safety features. They must
therefore interact using appropriate
methods and instruments, complying
with required safety standards.
The "Generic" operator must
operate on the appliance after
the technician has completed
up-
installation
electrical, water, gas and drain con-
nections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of interven-
tion and the relevant work zones, the
following classification is provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in
which the presence of an exposed
person constitutes a risk in terms of
the health and safety of such a per-
son;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when oper-
ating in such a way as to avoid
endangering the safety of the opera-
tor in case of unexpected circum-
stances
.
The following are also danger
zones /
• All the work areas within the appli-
ance
- 6 -
The
operating
structions have been
drawn up for the "Gene-
(transportation,
in-
fixing