Publicidad
Idiomas disponibles
Idiomas disponibles
How to Assemble Your Light Kit or Cap
5. Assemble the LED assembly to the light plate
assembly using the two key slots. Replace the
removed screw in Step 2 and secure all three screws.
(Figure 5)
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
6. Assemble the glass to the light plate assembly
by twisting in a clockwise direction. Do not overtighten.
(Figure 6)
LED
Assembly
Light Plate
Assembly
14
(continued)
Light Plate
Assembly
Figure 5
Glass
Figure 6
Publicidad
