Publicidad
Idiomas disponibles
Idiomas disponibles
us_main.book.book Page 15 Wednesday, August 24, 2022 9:47 AM
-
Depth (Includes only the product body that is loaded into the cabinet.
E
Excludes door, drawer, and handles)
F
Depth (Excludes Door Handle)
G
Depth when upper door is fully opened
H
Depth when lower door is fully opened
Minimum Dimensions
Minimum distance from top of range to combustible surface overhead
a
Minimum clearance to left/right wall
b
Maximum depth for cabinets above countertops
c
Front edge of the range side panel forward from cabinet
d
To cabinets below cooktop and at the range back
e
Minimum opening in overhead cabinets
f
Minimum distance from countertop to overhead cabinets at side
g
Height of countertop
h
NOTE
•
30" (76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an
a
unprotected wood or metal cabinet; or 24" (60.9 cm) minimum when bottom of wood or metal cabinet is
protected by not less than 1/4" (6.4 cm) flame retardant millboard covered with not less than no. 28 MSG
sheet steel, 0.015" (0.381 mm) stainless steel, 0.024" (0.610 mm) aluminum or 0.020" (0.508 mm) copper.
•
15" (38.1 cm) minimum between countertop and adjacent cabinet bottom.
g
• Important – Save for the use of the local electrical inspector.
• For installation in Canada, a free-standing range is not to be installed closer than 15/32" (12 mm) from
any adjacent surface.
Dimensions
INSTALLATION
15
LTEL7337*
24 3/4" (629.4 mm)
26 7/8" (683 mm)
38 5/8" (981.2 mm)
42 7/32" (1072.2 mm)
30" (76.2 cm)
5" (12.7 cm)
13" (33.0 cm)
2 1/4" (6.3 cm)
0"
30" (76.2 cm)
18" (45.7 cm)
36" (91.3 cm)
Publicidad
