us_main.book.book Page 28 Wednesday, August 24, 2022 9:47 AM
28 OPERATION
2
Press the numbers to enter the time. For
example, to set the clock for 10:30, press the
numbers: 1, 0, 3 and 0.
3
Press START.
NOTE
• The time of day cannot be changed during a
timed baking or self-clean cycle.
• To check the time of day when the display is
showing other information, press Clock.
• If no other buttons are pressed within 25
seconds of pressing Clock, the display reverts to
the original setting.
• If the display time is blinking, there may have
been a power failure. Reset the time.
Oven Light
The interior oven light automatically turns on
when the door is opened.
• Press Light to manually turn the oven light on.
Timer On/Off
The Timer On/Off serves as an extra timer in the
kitchen that beeps when the set time has run out.
It does not start or stop cooking.
The Timer On/Off feature can be used during any
of the other oven control functions.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
• Press Timer On/Off twice to set the time in
minutes and seconds.
• Press Timer On/Off once to set the time in
hours and minutes.
Canceling the Timer
1
Press Timer On/Off once.
Wi-Fi
The Wi-Fi button is used to connect the appliance
to a home Wi-Fi network.
Control Lock
The Control Lock feature locks the control panel
and oven mode knob.
• When the Control Lock feature is activated, the
cooktop and oven mode knob do not operate.
• To activate/deactivate Control Lock, press and
hold Control Lock for 3 seconds. The unlock
melody sounds and the controls unlock.
Start Time (Delayed Timed Cook)
The automatic timer of the Delayed Timed Cook
function turns the oven on and off at the time you
select. This feature can be used with the Bake,
Conv. Bake and Conv. Roast modes.
Cook Time (Timed Cook)
Set the oven to cook for a specific length of time
using the Timed Cook feature. This feature can
only be used with the Bake, Conv. Bake, Conv.
Roast, Air Sous-Vide, Air Fry, FrozenMeal and
Proof modes.
Settings (Hour Mode, Convection
Auto Conversion, Oven
Temperature, Preheat Alarm Light,
Beeper Volume, Fahrenheit or
Celsius, Cooktop on Alert Volume)
Press and hold Start Time for 3 seconds. Then
press the Start Time key repeatedly to toggle
through and change oven settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
• set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1
Press and hold the Start Time button for 3
seconds.
2
Press 1 to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically