Publicidad
Idiomas disponibles
Idiomas disponibles
us_main.book.book Page 29 Wednesday, August 24, 2022 9:47 AM
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉, and 325 ℉ shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1
Press and hold the Start Time button for 3
seconds.
2
Press Start Time repeatedly until Auto
appears in the display.
3
Press 1 to disable or enable auto conversion.
4
Press START to accept the change.
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven temperature
yourself.
• To begin, either raise or lower the temperature
15℉ (8 ℃). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower
the temperature again, using the first
adjustment as a gauge. For example, if the
adjustment was too much, raise or lower the
temperature 10 ℉ (5 ℃). If the adjustment was
not enough, raise or lower the temperature 20 ℉
(12 ℃). Proceed in this way until the oven is
adjusted to your satisfaction.
1
Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until U_AJ or L_AJ appears in the
display.
• U_AJ adjusts the upper oven and L_AJ
adjusts the lower oven.
2
Use the number buttons to enter the number
of degrees you want to adjust the oven
temperature.
3
Adjust the temperature either up or down by
pressing Start Time repeatedly to toggle
between plus (+) or minus (-).
4
Press START to accept the change.
NOTE
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be increased (+) or
decreased (-) as much as 35 ℉ or 19 ℃.
• Once the temperature is increased or decreased,
the display shows the adjusted temperature
until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
1
Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until PrE appears in the display.
2
Press 1 to turn the light on/off.
3
Press START to accept the change.
Adjusting the Beeper Volume
1
Press and hold the Start Time button for 3
seconds. Press Start Time repeatedly until
Beep appears in the display.
2
Press 1 to select Hi, Lo or Off.
3
Press START to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (℉) or Celsius (℃) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until Unit appears in the display.
2
Press 1 to select F (Fahrenheit) or C (Celsius).
3
Press START to accept the change.
OPERATION
29
Publicidad
