Siemens SIMATIC NET SCALANCE PSP9230PoE Instrucciones De Montaje página 15

SIMATIC NET
Industrial Ethernet Switches
Power supply of the SCALANCE PSP9230PoE
Compact Hardware Installation Instructions
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The
notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage
have no safety alert symbol. These notices shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of
injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products
and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
1 Introduction
The power supply SCALANCE PSP9230PoE has been specially developed for use with the IE switches SCALANCE XP-200.
The coordinated housing shapes enable space-saving installation and efficient use.
SCALANCE PSP9230PoE operates with AC and DC input voltages ranging from 100 V to 250 V and provides two output
voltages: 24 V DC and 54 V DC. This allows parallel supply of PoE devices and non-PoE devices:
• With the 24 V DC output (24 W), the SCALANCE PSP9230PoE can supply components with a 24 V DC supply and L-coded
voltage connections (e.g. SCALANCE XP208, SCALANCE XP216, SIMATIC ET200ECO).
• The SCALANCE PSP9230PoE can supply PoE devices (e.g. SCALANCE XP208PoE and SCALANCE XP216PoE) with the
necessary power via the DC 54 V output (224 W).
The power supply and devices are primarily intended for railroad and factory automation applications.
Article number: 6GK5 923-0PS00-2AA6
© Siemens AG 2023. All rights reserved
A5E51309689-AA, 02/2023
English
15