Siemens SIMATIC NET SCALANCE PSP9230PoE Instrucciones De Montaje página 27

8 Approvals
The SIMATIC NET products described in these Operating Instructions have the approvals listed below.
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the
following approvals have been granted for your product by the markings on the type plate.
Notes for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive or the Supply of Machinery (Safety) Regulations
(UK).
There is therefore no declaration of conformity relating to the EC Machinery Directive 2006/42/EEC or the Supply of
Machinery (Safety) Regulations 2008 (UK) for this product.
If the product is part of the equipment of a machine, it must be included in the procedure for obtaining the EU/UK conformity
assessment by the manufacturer of the machine.
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42/EEC and the Supply of Machinery
(Safety) Regulations 2008 (UK).
According to the Machinery Directive respectively the Supply of Machinery (Safety) Regulations (UK), we are obliged to point
out that the product described is intended solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it conforms with the Machinery Directive
2006/42/EEC and the Supply of Machinery (Safety) Regulations 2008 (UK).
EU Declaration of Conformity/manufacturer's declaration
The SIMATIC NET products described in these operating instructions meet the requirements and safety objectives of the
following EC directives and comply with the harmonized European standards (EN) which are published in the official
documentation of the European Union and here.
• 2014/30/EU (EMC)
EMC directive of the European Parliament and of the Council of February 26, 2014 on the approximation of the laws of
the member states relating to electromagnetic compatibility; official journal of the EU L96, 29/03/2014, pages. 79-106
• 2011/65/EU (RoHS)
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment, official journal of the EC L174, 01/07/2011, pages 88-110
You will find the EU Declaration of Conformity/manufacturer's declaration for these products on the Internet pages of
Siemens Industry Online Support.
The EU Declaration of Conformity/manufacturer's declaration is available to all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
DE-76181 Karlsruhe
Germany
Power supply of the SCALANCE PSP9230PoE
A5E51309689-AA, 02/2023
English
27