Siemens SIMATIC NET SCALANCE PSP9230PoE Instrucciones De Montaje página 20

English
4.4 Mount a SCALANCE XP216 on the SCALANCE PSP9230PoE
To mount a SCALANCE XP216 to a SCALANCE PSP9230PoE, follow the steps below:
1. Screw the adapter plates onto the power supply in the position shown (tightening torque 3 Nm). The four countersunk head
screw M5 x 16 in accordance with ISO 14581 ship with the SCALANCE PSP9230PoE.
2. Mount the SCALANCE XP216 on the SCALANCE PSP9230PoE using four M5 x 20 screws (maximum head diameter 9.5 mm,
tightening torque 3 Nm).
20
Power supply of the SCALANCE PSP9230PoE
A5E51309689-AA, 02/2023