Port - Abus TVIP41660 Manual De Instrucciones

English

12.3.2.2. Port

If you wish to enable external access to the camera, the following ports must be configured.
HTTP Port
The default port for HTTP transmission is 80. This port can alternatively be assigned a value in the
range of 1024~65535. If several cameras are located on the same subnetwork, each camera should
have its own unique HTTP port.
RTSP Port
The default port for RTSP transmission is 554. This port can alternatively be assigned a value in the
range of 1024~65535. If several cameras are located on the same subnetwork, each camera should
have its own unique RTSP port.
HTTPS Port
The standard port for HTTPS transmission is 443.
SDK Port (control port)
The standard port for SDK transmission is 8000. Communication port for internal data. As an
alternative, this port can be assigned a value in the range 1025 ~ 65535. If several IP cameras are
located in the same subnetwork, each camera should have its own unique server port.
Apply the settings by clicking "Save".
104