Basic - Abus TVIP41660 Manual De Instrucciones

English

12.3.4.1. Basic

Basic Parameters
Enable Proportional Pan
Enable this function to adjust the pan / tilt speed to the respective zoom level. With a high zoom level,
the pan / tilt speed is lower to that the picture does not move too quickly in the live view.
Preset Speed
You can select a predefined preset speed of between 1 and 8 here.
Keyboard Control Speed
You can adjust the response speed using the control desk. You can choose between "Low", "Normal"
and "High".
PTZ OSD
Zoom status
Set the display duration for the zoom status here. You can select from between 2 seconds, 5 seconds,
10 seconds, "Always Close" and "Always Open".
PT Status
Set the display duration for the azimuth angle during swivelling and tilting here.
You can select from between 2 seconds, 5 seconds, 10 seconds, "Always Close" and "Always Open".
Preset Status
Set the display duration for the preset names when calling up a preset position here.
You can select from between 2 seconds, 5 seconds, 10 seconds, "Always Close" and "Always Open".
Power off memory
Set Resume Time Point
After a reboot, the camera can resume with the last PTZ status or the last executed action. Here, you
can specify the time after which the resumption of the last action is started. You can select from
between 30 seconds, 60 seconds, 300 seconds or 600 seconds.
Apply the settings by clicking "Save".
115