UNPACKING THE PRESSURE
WASHER
!
Always have assistance when lifting
the pressure washer. The pressure
washer is heavy; lifting it could cause
bodily harm.
Avoid cutting on or near staples to
!
prevent personal injury.
The following tools are required:
Box cutter or similar device
8 mm wrench
17 mm wrench (WP2500)
13 mm wrench (WP3000Z)
1. Carefully cut the packing tape on top of the carton.
2. Fold back top fl aps to reveal the owner's manual.
Remove owner's manual and save it for reference.
3. Carefully cut two sides of the carton to remove the
pressure washer.
COMPONENTS
Verify the contents against the list below. If any
parts are missing, please locate an authorized
Westinghouse dealer at www.westpropower.com or call
1-855-WHHELP1 (1-855-944-3571).
CAUTION
UNPACKING
1
7
Figure 4 – Unpacking
1 - High-Pressure
Hose (1)
2 - Spray Wand (1)
3 - Upper Handle
(1)
4 - Nozzles (5)
N
OTE:
A 0.6-liter bottle of SAE 10W30 oil is also
included. Soap reservoir is not included.
2
3
6
8
5 - Soap Hose (1)
6 - Spray Gun (1)
7 - Wheels (2)
WP2500
8 - Wheels (2)
WP2800 and
WP3000Z
4
5
13