Oster BVSTEM7701 Manual De Instrucciones página 8

NOTE: Tamp or compress coffee using the tamper as shown
(see figure 3). Do not overfill the filter. This might cause
clogging or overflow.
3. FOR PODS: place the pod filter in the porta-filter and insert
the pod in it.
4. Position porta-filter underneath the brew head, attach
porta-filter by first moving retainer clip back, position handle
so that the handle lines up with the open lock icon "
the unit and fits into the groove. Then, slowly turn it to the
right until the arrow icon " " located at the retention clip is
aligned with the closed lock symbol " " on the unit.
5. Make sure to place one espresso "demitasse" cup under the porta-filter.
6. Make sure the unit is plugged in.
7. Turn unit on "I" by pressing the button located in the back of the unit.
8. The control panel lights (4 lights in the center) will start
blinking. Once these lights become solid blue, press the pod/
single shot of espresso (Ristretto) button "
9. The unit will start brewing a single shot of espresso
(Ristretto). The unit will sound three times once the cycle is
completed. Your delicious single shot of espresso (Ristretto)
is ready to be enjoyed.
NOTE: To brew less coffee than the preset serving, press the
function button to stop the brewing process when the amount of
coffee desired is reached. The unit will beep three times indicating
the customized process has been completed.
10. Turn off the unit off "O" by pressing the button on the back of it. Let it cool down
before you clean it. See the "Cleaning Your Espresso Maker" section for details.
PREPARING A DOUBLE SHOT OF ESPRESSO (DOPPIO)
1. Select the filter for a double shot of espresso (Doppio)
(see figure 5).
2. Place the selected filter on porta-filter and fill it with fresh,
fine ground espresso coffee. Clean any excess coffee from
the rim of the filter holder. This will assure proper fit under
the brew head.
NOTE: Tamp or compress coffee using the tamper as shown
(see figure 6).Do not overfill the filter. This might cause
clogging or overflow.
3. Position the porta-filter underneath the brew head, attach
porta-filter by first moving retainer clip back, position handle
so that the handle lines up with the open lock icon "
the unit and fits into the groove. Then, slowly turn it to the
right until the arrow icon " " located at the retention clip is
aligned with the closed lock symbol " " on the unit.
4. Make sure to place two-espresso "demitasse" cups or a
small pitcher under the porta filter.
5. Make sure the unit is plugged in.
6. Turn unit on "I" by pressing the button located in the back of the unit.
7. The control panel lights (4 lights in the center) will start
blinking. Once these lights become solid blue, press the
double shot of espresso (Doppio) button "
8. The unit will start brewing double shot of espresso (Doppio).
The unit will sound three times once the cycle is completed
indicating that the delicious double shot of espresso (Doppio)
are ready to be enjoyed.
" on
" (see figure 4).
" on
" (see figure 7).
E ng lish-7
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7