Wakeup Timer; Setting The Timer - Teac SL-D800BT Manual Del Usuario

At the set time, sound will be output from the speakers.
o Adjust the clock before setting the timer (page 15).
30

Wakeup timer

Setting the timer

1
Put the unit into standby (power off).
The unit must be in standby to set the timer.
Press the STANDBY/ON button to put the unit into
standby.
2
Press and hold the TIMER button for at least
two seconds.
The timer indicator (
across the display once. "ON TIME" appears and then
the time input mode becomes active.
The hour value blinks.
o If no action is taken for 20 seconds, timer setting
will end automatically.
3
Turn the MULTI JOG dial to set the timer
starting hour, and press the TIMER button.
o After setting the hour, the minutes blink.
4
Turn the MULTI JOG dial to set the timer
starting minute, and press the TIMER
button.
After making the TIMER ON setting, "OFF TIME" appears
and the hour value blinks.
Press for at least
2 seconds
) blinks and "SET TIMER" scrolls
e