Setting The Timer - Teac MC-DX20 Manual Del Usuario

Adjust the clock before setting the timer.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
1 Press and hold the TIMER button until "TIMER" and
"ON" indicators appear on the display.
The "hour" value starts flashing.
< When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
2 Press the SKIP button (.//) to set the start time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.
20

Setting the Timer

3 Press the SKIP button (.//) to set the start time
(minute), and then press the TIMER button.
"TIMER" and "OFF" indiactors appear on the display and the
"hour" value starts flashing.
4 Press the SKIP button (.//) to set the stop time
(hour), and then press the TIMER button.
The "minutes" value starts flashing.
5 Press the SKIP button (.//) to set the stop time
(minute), and then press the TIMER button.