JUKI MEB-3200 Manual De Instrucciones página 79

Others
Name of part Foot pedal switch (asm.)
Shape and
application
Operation of the sewing machine
is performed by foot pedal.
Part No. M85905130AA
■ Installing the optional foot pedal
CN71
J71
The cable is used to connect
pedal switch (asm.).
CN73
J73
Pedal switch cable (asm.)
M90146200A0
Hand switch is provided with S type and J
type as standard. When using the optional
foot switch, pedal switch cable (asm.) is
necessary.
1) Loosen five setscrews and remove cover
located at the rear of the machine head.
2) Remove CN71 and CN73 on the CONNECTOR
circuit board.
3) Connect pedal switch (asm.)
cable (asm.) , and insert the cable to J73 on
the CONNECTOR circuit board.
4) Connect ground wire
to the machine head.
5) Fix the cord with the cable clip band together with
other cords.
Drive and start of the presser can be
performed with the foot switch.
Operation with the hand switch cannot be
performed.
Hand switch (asm.)
Button switch
32076655
and pedal switch
of the pedal switch (asm.)
65