Descargar Imprimir esta página

TIASTAR GGJ-261B Manual De Instrucciones página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Chapter VI Cleaning and Maintenance
1. Disconnect the electric dryer before cleaning.
2. After drying the food products, clean the drying
hopper with warm water, clean it with soft cotton cloth
and, if necessary, with the preparation for cleaning the
utensils, and then dry it.
3. The electric dryer cannot be cleaned with water flow
and the base of the electric dryer cannot be cleaned
with water. Clean the dirty surface of the base of the
electric heater dryer with a wet rag.
4. Abrasive cleaners, metal brushes and organic
solvents should not be used.
5. Store clean products in a cool and ventilated
environment.
Chapter VII Faults and
Troubleshooting Methods
Failure phenomenon
Product does not work
When the product works,
the lamp is not on.
The product works
without hot air.
Reason
1. The power plug is forgot
or loose.
2. Power outlet damaged
3. Power cord damage
Power indicator damaged
1. The fuse is blown out
2. Burn out of electric heating wire
Solution
Plug in the plug
6-14
12-38
Send to designated
department or professional
maintenance personnel for
replacement
Send to designated
department or professional
maintenance personnel for
replacement or scrap
Send to designated
department or professional
maintenance personnel
for replacement or scrap
013

Publicidad

loading

Productos relacionados para TIASTAR GGJ-261B