Hofmann monty 1520-2 Manual De Operador página 26

monty 1520-2
USA - CANADA
Only for Tubeless wheel models:
F1. Press bead seater/inflator pedal (1, Fig. 4.1-3) on
left side of the machine half way down: air will come
from inflation hose end only (2, Fig. 4.1-3).
F2. Press bead-seater pedal (1, Fig.4.1-3) down swiftly
to get air blast from the inflator jets (3, Fig.4.1-3).
Note: Air simultaneously continues to exit the hose
(2, Fig. 4.1-3) connected to the tire.
WARNING: ONCE BEADING IS COMPLETE,
IMMEDIATELY STOP INTRODUCING AIR.
2
WHEN OPERATING THE BEADING DEVICE IT IS
3
MANDATORY TO WEAR EAR PROTECTORS AND
SAFETY GLASSES TO PREVENT CONTAMINATION
FROM NOISE, DUST AND CHIPS BLOWN BY THE
AIR JET.
4.1-3
DANGER OF TIRE EXPLOSION
26 Operator's Manual