Publicidad
Idiomas disponibles
Idiomas disponibles
How to use your Braun ThermoScan
1 .
To achieve accurate
measurements, make sure a
new, clean lens filter (2)
is in place before
each measurement .
2 .
Gently squeeze the opposite
ends of the thermometer
to pull off the probe cap (1) .
Do not use force in removing
the cap .
3 .
To turn the thermometer on,
push the «start» button (4) .
During an internal self-
check, the display shows
all segments .
The thermometer is ready
to use after two beeps are
sounded and this display appears .
4 . Perform an ear tug to straighten the ear canal .
This gives the thermometer a clear view of the eardrum .
36.8 ºC
36.8 ºC
An ear tug is best performed by using your free hand to grasp the
outer edge of the top half of the ear . To take your own temperature,
wrap your free hand around the back of your head and tug your ear
from behind .
6
Children under 1 year:
Pull the ear straight back .
Children aged 1 year to adult:
Pull the ear up and back .
5 .
While tugging the ear,
fit the probe (3) snugly
into the ear canal, then
push the «start» button
(4) .
After one second a beep will signal the end
of the measuring process, the result is
shown on the display (6).
After 2 short beeps, the ear symbol will stop
flashing .
6 .
For the next measurement,
remove the used lens filter
and put on a new, clean lens filter by
snapping into position .
Fit the probe snugly into the ear canal, then
push the «start» button .
The Braun ThermoScan ear thermometer turns off automatically after
60 seconds of inactivity .
7
Publicidad
