Publicidad
Idiomas disponibles
Idiomas disponibles
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the SCAN TYPE menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the scan type sq or t 1.
4.
Short press the PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
exits
If no key is pressed, the unit
from the display.
"
"means scanning stops when busy channel is founded.
"t 1" means scanning stops when busy channel is founded and return to
scan after 5 seconds.
Type default value is : 59.
9) SCAN SKIP
This function allows to
memorize/erase
memory.
1.
Select a channel
2.
Long Press PUSH key (4) to
enter
3.
Turn the CH rotary knob (6) or use UP/DN keys (13) on the microphone to
select
the
menu.
4.
Press PUSH key (4) to
validate.
5.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
alternate
to
between On and OF.
6.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press PTT key (18) to
pears from the display.
7.
If no key is pressed, the unit
exits
from the display.
On memorize the current channel into the SCAN SKIP memory. When a
channel is stored in the memory,
channel number.
OF erase the current channel from the SCAN SKIP memory,
from the display.
See § SKIP on page 48.
10) PA SETTING
This function allows to
select
the operating mode of Public Address.
Long Press PUSH key (4) to
enter
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
a channel form the SCAN SKIP
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
appears on the display close to the
disappears
the MENU.
is displayed.
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the PA SETTING menu.
2.
Press PUSH key (4) to
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
select
to
the operating mode of the PA : I n, OF or PA.
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press PTT key (18) to
pears from the display.
5.
If no key is pressed, the unit
from the display.
I n: the modulation of the microphone is transmitted to the external loud-
speaker connected to jack PA.SP. (D). The received signal is transmitted to
the internal loudspeaker [or external optional loudspeaker connected to
jack EXT.SP (E). "PA" blinks alternately with the modulation mode (AM or FM).
OF: The reception is no more functional. Only the modulation of the micro-
phone is transmitted to the Public Address loudspeaker connected to jack
PA.SP. (D). PA and level of the
PA: the modulation of the microphone and the received signal are transmit-
ted to the Public Address loudspeaker connected to jack PA.SP. (D). "PA"
blinks alternately with the modulation mode (AM or FM).
Turn the VOL knob (1) to
Default PA setting is I n.
See § PA (Public Address) page 47.
11) MICROPHONE TYPE
PRESIDENT GEORGE II can be used with both a PRESIDENT electret and
dynamic 6-pin microphone (see microphone wiring on page 83). When
disap-
the unit is turned on, the microphone type is displayed briefly.
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
2.
Press PUSH key (4) to
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the microphone type EL (electret) or dy (dynamic).
4.
Short press the PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
Microphone type default is EL (electret).
53
validate.
The current value blinks on the display.
validate
and
exit
the MENU.
exits
MENU after 10 seconds.
PA
are displayed.
adjust
the audio level of the mode PA.
enter
the MENU.
is displayed.
menu.
validate.
The current value blinks on the display.
validate
and
exits
MENU after 10 seconds.
disap-
disappears
exit
the MENU.
disappears
Publicidad
