Publicidad
Idiomas disponibles
Idiomas disponibles
12) SWR CALIBRATION
adjust
This function allows you to
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to confirm. The radio automatically switches to
without pressing the PTT switch (18) and calibration begins. Calibration time
is 5 minutes maximum. A countdown is done in the display.
3.
Adjust the antenna.
-
The beep* is continuous when the SWR value is 1. 0 . The space between the
beeps becomes larger and larger as the SWR value moves away from1. 0 .
-
The volume of the beep is adjustable with VOL knob (1).
-
The display shows the SWR value, for example 2. 5 .
4.
Press the PTT switch (18) to
exit
*Check that the beep volume is set to a suitable level.
See ADJUSTMENT OF SWR page 45.
13) NRC SET
The NRC filter can be set independently in transmission ( ) as in reception
( ).
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu. The last parameter used and its value appears
on the display.
2.
Press the PUSH key (4) to confirm. The parameter blinks, X or X .
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
X (recepetion) or X (transmission).
4.
Press PUSH key (4) to confirm. The value of the filter blinks.
5.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
change
the value from 01 to 05.
6.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press PTT key (18) to
pears from the display.
The default value are 01 (transmision) and 01 (reception)
See the § NRC page 49 to
activate/deactivate
14) CODE SET
For simplicity, in this manual we will speak of CTCSS/DCS code to indicate
both a CTCSS tone and a DCS code, of GENRE to indicate the kind of code
(CTCSS, DCS or OFF = no code). TYPE indicates whether this is a TX transmis-
the SWR by beeping.
the MENU.
is displayed.
TX
SWR CALIBRATION.
the MENU.
is displayed.
validate
and
exit
the MENU.
the function.
sion or an RX reception and MODE specifies the operating mode, Identical
Id or different DF. See § CTCSS/DCS page 46.
This menu allows you to configure the operating mode of the CTCSS/DCS
function and to store the CTCSS/DCS codes.
2 operating modes:
-
I d means that the code used will be identical for transmission (TX) and for
mode
reception (RX).
-
DF means that the user can use one code (or OFF = no code) for transmis-
sion (TX) and another (or OFF = no code) for reception (RX).
Long Press PUSH key (4) to
OPERATING MODE
1.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the
2.
Briefly press the PUSH key (4) to confirm. The operating mode flashes (I d or
DF).
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the desired operating mode.
STORING A CTCSS/DCS CODE
Depending on the operating mode used, the procedure differs:
Identical mode I d
4.
Short press on the PUSH key (4) makes the genre blink ("CTCSS", "DCS" or
"OFF" no genre).
5.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
select
to
the genre or...
6.
Press the PUSH key (4) to
OFF selected).
7.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the code (from 01 to 38 for CTCSS and 001 to 104 for DCS).
Different Mode DF
4.
Short press on the PUSH key (4) makes the type RX blink.
disap-
5.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the RX or TX type.
6.
A short press on the PUSH key (4)
value flashes ("CTCSS", "DCS" or "OFF" no genre).
7.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
select
to
the genre or...
8.
Press the PUSH key (4) to
OFF has been selected).
9.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
54
enter
the MENU.
is displayed.
menu.
confirm
the genre. The code value flashes (unless
validates
the choice of type. The genre
confirm
the genre. The code value flashes (unless
Publicidad
