Publicidad
Idiomas disponibles
Idiomas disponibles
6.4 POKER CONNECTION TO FLEXIBLE SHAFT
The flexible shafts TDX are intended to connect the pokers: AX40, AX48 and AX58.
Allowing to interchange of a poker to other quickly and without a special tool. The model AX25, AX32 due
to the diameter need a special transmission. (TDXE).
en
6.5 INSPECTION
1. Before starting the job, check the correct working of all handling and safety devices.
2. Inspect regularly the good condition of the transmission. When the hose is broken, repair it or
replace it to avoid damaging the shaft or the poker.
3. When notice wear parts, replace it.
4. If defects are found in the safety devices or other defects which could reduce the safe handling
of the equipment, notify immediately to proper responsible person.
7
DIMENSIONS OF WEAR FOR DIAMETERS AND LENGTHS OF
THE POKERS
A.
B.
C.
D.
KAMEL - AX25, AX32, AX40, AX48, AX58
8
TDX1m, TDX1-5m, TDX2m, TDX3m, TDX4m, TDX5m, TDX6m
CONNECTION PROCEDURE:
1-
Introduce the hexagonal driver of the poker in the shaft.
2-
Apply sealant or LOCTITE 243 to the threaded part of the transmission.
3-
Screw the poker on the screwed end of the transmission up to fasten with spanner (left
threads).
DIAMETRO
MODELO
(mm)
AX 25
23,5 (25)
AX 32
30,5 (32)
AX 40
38,5 (40)
AX 48
45,5 (48)
AX 58
55,5 (58)
The minimum dimensions are bold printed.
The dimensions into brackets are the original dimensions.
Replace the housing when reach the minimum diameter.
Replace the tip when reach the minimum length.
LONGITUD
(mm)
280 (285)
361 (366)
330 (335)
330 (335)
339 (344)
KAMEL - FLEXIBLE SHAFT AND POKERS
Publicidad
