Electromagnetic Compatibility (Emc) - arjo TheraKair Visio Manual Del Usuario

ELECTROMAGNETIC COMPATIBILITY (EMC)

Product has been tested for compliance with current regulatory standards regarding its capacity to
block EMI (electromagnetic interference) from external sources.
Some procedures can help reduce electromagnetic interferences:
•
Use only Arjo cables and spare parts to avoid increased emissions or decreased immunity
which can compromise the correct functioning of the equipment.
•
Ensure that other devices in patient-monitoring and/or life-support areas comply to
accepted emissions standards.
WARNING: Wireless communications equipment such as wireless computer network devices,
mobile phones, cordless telephones and their base stations, walkie-talkies, etc. can
affect this equipment and should be kept at least 1.5m away from the equipment.
Intended Environment: Home Healthcare Environment and Professional Healthcare facility
environment.
Exceptions: HF Surgical Equipment and the RF Shielded room of an ME SYSTEM for magnetic
resonance imaging
WARNING: Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary,
this equipment and the other equipment should be observed to verify that they are
operating normally.
Guidance and manufacturer's declaration - electromagnetic emission
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
emissions IEC 61000-3-3
Compliance
Group 1
Class A
Class A
Complies
39
Guidance
This equipment uses RF energy only
for its internal functions. Therefore its
RF emissions are very low and are
not likely to cause any interference in
nearby electronic equipment.
This equipment is suitable for use
in all establishments, other than
domestic establishments and those
directly connected to the public low
voltage power supply network that
supplies buildings used for domestic
purposes.