Patient Specific Adjustments; Foot End Interface; Pulsation Adjustment - arjo TheraKair Visio Manual Del Usuario

Foot End Interface

If necessary, heel area pressure can be reduced by disconnecting a foot end cushion
corresponding to the patients heel. It is not recommended that more than one cushion be
disconnected at a time.
1. Locate the cushion corresponding to the patients heel.
2. The cushions are connected to the air supply at the side opposite the air supply hose.
3. Disconnect the cushion by depressing the grey latch and pulling the connector out.
4. Cushions are reconnected by pushing the connector back into the socket.

Pulsation Adjustment

If necessary, pulsation therapy may be activated.
1. Press pulsation on the Home screen to call up the Pulsation screen.
2. Select the required pulsation intensity.
3. Select the required pulsation cycle time.
4.
•
to 4 cm clearance.
30