EINHELL GC-ET 4530 Manual De Instrucciones página 10

•
Never use the equipment while it is raining or
in damp or wet surroundings.
•
Protect your equipment against moisture and
rain.
•
Before you switch on the equipment, check
that the cutting unit will not touch any stones
or other objects.
•
Always wear suitable working clothes to
prevent injuries to the head, hands and
feet. For this purpose, wear a helmet, safety
goggles (or visor), high boots (or strong
shoes and long trousers made of tough
fabric) and work gloves.
•
When the equipment is in operation, you must
always hold it away from your body!
•
Do not switch on the equipment when it is
turned around or when it is not in working
position.
•
Switch off the machine and pull out the
power plug: when the equipment is not being
used, when you leave it unsupervised, when
checking the equipment, when removing or
replacing the spool, or when transporting the
equipment from one place to another.
•
Keep the equipment away from other people,
especially children, and from pets. There may
be stones and other objects in the grass that
is cut and thrown up.
•
When you are working, keep a distance of at
least 16 ft. (5 m) from other persons and pets.
•
Do not cut against hard objects. This will help
you to prevent causing injury to yourself and
damage to the equipment.
•
Use the edge of the safety guard to keep the
equipment away from walls, different surfaces
and fragile objects.
•
Never use the equipment without the safety
guard.
•
This equipment is not allowed to be used by
children or by persons with reduced physical,
sensory or mental capacities or those with a
lack of experience and knowledge. Children
should be supervised so that they do not play
with the equipment. Children are not allowed
to carry out the cleaning or maintenance.
•
Avoid abnormal working postures. Make sure
you stand squarely and keep your balance
at all times. Always maintain good footing
on inclines. Only operate the equipment at a
walking pace.
•
Risk of injury from dangerous moving parts!
•
The moving parts are not allowed to be
touched before the power plug has been
removed and all moving parts have come to a
complete standstill.
Anl_GC_ET_4530_SPK7_USA.indb 10 Anl_GC_ET_4530_SPK7_USA.indb 10
EN
•
Read the directions with due care. Familiarize
yourself with the operator controls and proper
operation of the equipment.
•
Never allow children or other persons who
are not familiar with the operating instructions
to use the equipment. Contact your local
governmental agency for information
regarding minimum age requirements for the
user.
•
Always keep in mind that the user of the
equipment is personally responsible for
accidents or hazards involving other persons
or their property.
•
Before use, always carry out a visual check to
make sure that the safety devices or covers
are not missing or damaged and that they are
correctly fitted.
•
Never use the equipment in bad weather
conditions and particularly never when there
is a risk of lightning.
•
Never use the equipment with a damaged
cover or safety device or when a cover or
safety device is missing.
•
Switch on the motor only when there are no
hands or feet within range of the cutting unit.
•
Always switch off the equipment and pull out
the power plug:
- When the equipment is left unattended;
- Before you remove a blockage;
- Before you inspect, clean or work on the
equipment;
- After the equipment strikes a foreign object;
- When the equipment begins to make
unusual vibrations (examine immediately).
The equipment is not allowed to be put into
operation again until the cause of the unusual
vibrations is eliminated. If you fail to find the
cause of the vibrations, contact a service
center.
•
Risk of injury from the cutting unit! Keep
hands and feet away from the cutting unit!
•
Use only spare parts and accessories which
are recommended by the manufacturer.
•
Examine and service the equipment regularly.
Important! The safety guard is there to
ensure your safety and the safety of others.
It is also essential for the equipment to
work correctly. Failure to comply with this
instruction will void your warranty as well as
create a potential source of danger.
•
Never use your hands to try to stop the
cutting unit. Always wait for it to stop by itself.
•
Use only genuine cutting units.
- 10 -
21.12.2022 08:57:24 21.12.2022 08:57:24