EINHELL GC-ET 4530 Manual De Instrucciones página 7

g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of these devices can reduce dust
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause
severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch
does not turn it on and off . Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may aff ect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of power
tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations diff erent
from intended could result in a hazardous
situation.
Anl_GC_ET_4530_SPK7_USA.indb 7 Anl_GC_ET_4530_SPK7_USA.indb 7
EN
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
5) Service
a) Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
String trimmer and lawn edge trimmer safety
warnings
a) Do not use the machine in bad weather
conditions, especially when there is a risk
of lightning. This decreases the risk of being
struck by lightning.
b) Thoroughly inspect the area for wildlife
where the machine is to be used. Wildlife
may be injured by the machine during
operation.
c) Thoroughly inspect the area where the
machine is to be used and remove all
stones, sticks, wires, bones, and other
foreign objects. Thrown objects can cause
personal injury.
d) Before using the machine, always visually
inspect to see that the cutter and the
cutter assembly are not damaged.
Damaged parts increase the risk of injury.
e) Before use, check the power cord and
any extension cord for signs of damage
or aging. Do not use the machine if the
cord is damaged or worn. If the cord is
damaged or worn during use, switch off
the machine and do not touch the cord
before disconnecting it from the supply. A
damaged power cord or extension cord may
result in electric shock, fi re and/or serious
injury.
f) Check the grass collector frequently for
wear or deterioration. A worn or damaged
grass collector may increase the risk of
personal injury.
g) Keep guards in place. Guards must be in
working order and be properly mounted.
A guard that is loose, damaged, or is not
functioning correctly may result in personal
injury.
h) Keep all cooling air inlets clear of debris.
Blocked air inlets and debris may result in
overheating or risk of fi re.
i) Wear eye protection and ear protection.
- 7 -
21.12.2022 08:57:23 21.12.2022 08:57:23