EINHELL GC-ET 4530 Manual De Instrucciones página 12

Don't Force Appliance – It will do the job better
and with less likelihood of a risk of injury at the
rate for which it was designed.
Don't Overreach – Keep proper footing and
balance at all times.
Stay Alert – Watch what you are doing. Use
common sense. Do not operate appliance when
you are tired.
Disconnect Appliance – Disconnect the appliance
from the power source when not in use, before
servicing, when changing accessories such as
blades, and the like.
Store Idle Appliances Indoors – When not in use,
appliances should be stored indoors in dry, and
high or locked-up place – out of reach of children.
Maintain Appliance With Care – Keep cutting
edge sharp and clean for best performance and
to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Inspect
appliance cord periodically, and if damaged,
have it repaired by an authorized service facility.
Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free
from oil and grease.
Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged
should be carefully checked to determine that
it will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other condition that may
aff ect its operation. A guard or other part that is
damaged should be properly repaired or replaced
by an authorized service center unless indicated
elsewhere in this manual.
1) Keep guards in place and in working order.
2) Keep blades sharp.
3) Keep hands and feet away from cutting area.
Replacement Parts
When servicing use only identical replacement
parts. Avoid Dangerous Environment – Don't use
appliances in damp or wet locations.
Don't Use In Rain.
Keep Children Away – All visitors should be kept
at a distance from work area.
Dress Properly – Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Anl_GC_ET_4530_SPK7_USA.indb 12 Anl_GC_ET_4530_SPK7_USA.indb 12
EN
Use of rubber gloves and substantial footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
Use Safety Glasses – Always use face or dust
mask if operation is dusty.
SAVE THESE INSTRUCTIONS
Explanation of the warning sign (Fig. 8)
1. Warning!
2. Wear eye protection!
3. Wear ear protection!
4. Protect from humidity!
5. Read the operating instructions!
6. Pull out the power plug!
7. Keep other persons away!
8. The equipment continues to rotate!
2. Layout and items supplied
2.1 Layout
1. Power cord
2. Upper handle
3. On/Off switch
4. Additional handle
5. Knob for additional handle
6. Lock for handlebar height adjustment
7. Top handlebar
8. Bottom handlebar
9. Edge roller
10. Locking sleeve for rotating motor head
11. Line spool
12. Safety guard
13. Cable strain-relief clip
14. 4 screws
15. Lock for adjusting the angle of the motor head
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
- 12 -
21.12.2022 08:57:24 21.12.2022 08:57:24