Pando PI TEP Manual De Uso E Instalación página 75

INOXPAN S.L.
Starting-up
•
S tart-up / switch off the hob:
A ction
To start
To stop
•
S tart-up / switch off a heating zone:
A ction
To set
(adjust the power)
To stop
If no action is taken within 20 seconds, the electronics return in waiting position.
•
Example of power increase:
power level
The segments from the power display are turning on one by one until the required power level is
reached.
•
Example of power decrease:
Required
power level
The segments from the power display are turning off one by one until the required power level is
reached.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and the symbol [ H ] indicates this on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
Do not touch the heating zones and do not put any heat sensitive objects on them, as long as the
residual heat indicators are switched on. There are risks of burns and fire.
Control panel
press key [
press key [
Control panel
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
Current
]
]
8
D isplay
[ 0 ]
nothing or [ H ]
D isplay
[ 1 ] to [ 9 ]
[ 0 ] or [ H ]
Required
power level
Current
power level
EN